|
TEA
Transplanter |
|
 |
|
The Hamilton T.E.A. XP600M series
transplanter is a radical new development of the XP series of tranplanters,
highly user friendly and designed for all sizes of greenhouse. Each head is
independently controlled by a sophisticated, but easy to use, computer. It
can be constructed with 3 to 8 heads, resulting in the ideal setup for your
operation. A four head machine can transplant at a rate of 6500+ plants per
hour, depending on the application, rising to nearly 10000 plants per hour
for a six head machine. Typically, two operators can keep up with
production, one to load trays and label packs, and the other to unload and
patch the occasional misses. |
 |
Computer controlled for accuracy and versatility, it can transplant from
virtually any plug tray into almost any pot or pack configuration. It can
even transplant from small to large plug trays. Trays can be fed
lengthways or widthways through the machine to increase the transplanting
options. The computer can be programmed through the control panel at the
factory, or by the operator, with up to 99 plug tray programs and 99
pack/pot programs, giving nearly 10000 possible combinations. Pickup and
planting depth, and speed, can be varied while the machine is operating. A
floppy disk drive is provided for backup, and program and software updates
|
 |
Programming for different trays is achieved by entering the tray
dimensions into the computer memory. The memory can be recalled at the
touch of a button and no tools are required when changing trays and packs.
All motions are motor controlled and no manual adjustments are required.
Plug trays and packs up to 600mm (24") wide can be accommodated. The
computer automatically selects the optimum number of heads to be used, and
parks those not required, eliminating the need to add and remove heads
manually.
|
|
|
Click
here to download a product leaflet in Adobe PDF format
(273KB) |
